Standard grip in Black Cerakote, SLS carbon fiber composite, front three-quarter view

SLS Carbon Fiber vs Injection-Molded AR-15 Grips

Almost every AR-15 grip on the market is injection-molded: molten polymer is shot into a steel mold, cooled and ejected. It's a proven process and it makes grips inexpensive. Tapp Tactical grips are made differently. Each one is precision-sintered from carbon-fiber-reinforced nylon, vapor-polished and Cerakoted to order. Here's what that changes.

Material

Molded grips typically use glass-filled nylon or other engineering polymers. Ours use PA11-CF, a nylon reinforced with carbon fiber. Its material data sheet (X axis) lists an ultimate tensile strength of 69 MPa, flexural strength of 110 MPa, a flexural modulus of 4.2 GPa and a heat deflection temperature of 178 °C (352 °F) at 1.8 MPa. In the hand, that means a stiff, solid grip with no flex or creak.

Design freedom

Molds need draft angles and simple pull directions, which limits the shapes a grip can take. Sintering builds the part from powder with no mold at all, so open side windows, undercuts and fine texture are possible without compromise. That's how our Cutout models exist.

Finish and color

Molded grips get their color from pigment in the plastic, so the choice is usually black, FDE or OD Green. Our grips are vapor-polished for a smooth, sealed, very strong finish, then Cerakoted, so you can choose from the full Cerakote library.

Made to order

Molding makes sense when you need thousands of identical parts. Sintering lets us make each grip when you order it, in the model and color you choose, in the USA.

Side by side

Typical injection-molded grip Tapp Tactical SLS grip
Process Molded in a steel tool Precision-sintered from powder, no mold
Material Glass-filled nylon or other polymers Carbon-fiber-reinforced PA11
Color Molded-in, a few colors Any Cerakote color
Finish As molded Vapor-polished, then Cerakoted
Shapes Limited by mold draft Cutouts and undercuts possible
Production High-volume batches Made to order in the USA
Typical price About $15 to $40 $79 to $89 (+$25 for a custom color)

Which should you buy?

If you want an inexpensive grip in black, a molded grip will do the job. If you want a stiffer composite, a refined finish, a color that matches your build and a grip made for you, that's what we make.

Go deeper with what selective laser sintering is, vapor polishing explained and our materials and process page, or read the AR-15 grip buying guide.

Made to order in the USA. Ships in 3–5 business days. Custom (“Other”) colors can add up to 10 business days.

Build your grip

Back to blog

FAQ

Is an SLS carbon fiber grip stiffer than a molded polymer grip?

It depends on the specific polymer, but carbon-fiber-reinforced PA11 is stiff and impact-resistant, with a flexural modulus of 4.2 GPa and a heat deflection temperature of 178 °C (352 °F) at 1.8 MPa on its data sheet. In the hand the grip feels solid, with no flex or creak.

Why does an SLS grip cost more than a molded one?

Molded grips spread the cost of steel tooling over very high volumes. Each Tapp Tactical grip is made to order, vapor-polished and Cerakoted, which takes more time and material.

Can I get an SLS grip in a custom color?

Yes. Black, FDE and OD Green are included, and Other lets you enter any Cerakote color name or code for +$25. Custom (“Other”) colors can add up to 10 business days. Custom-color grips can’t be returned.

Build your grip

Four profiles, any Cerakote color, made to order in the USA. Ships in 3–5 business days.

Open the builder

More guides