Generic AR-15 in left profile fitted with a Tapp Tactical Standard grip in FDE Cerakote

Fitment & Compatibility

Fits mil-spec AR-15 lower receivers. Grip screw included.

All four Tapp Tactical models share the same receiver interface, so if one fits your rifle, they all do.

Compatible

  • Mil-spec AR-15 lower receivers (5.56 / .223 and other AR-15-pattern calibers on a standard AR-15 lower)
  • Standard AR-15 grip screw (included with every grip)
  • The selector detent spring and detent from your existing setup install in the usual place

Not compatible

  • AR-10 / LR-308 pattern rifles. An AR-10 version is coming soon.
  • Lowers with a non-standard grip interface (some proprietary or integrated-grip designs)

Sizes

Model Height (receiver to bottom) Max width Weight
Standard 4.0 in 1.06 in 2.0 oz
Standard Cutout 4.0 in 1.06 in 1.5 oz
Wushu 4.3 in 1.26 in 2.3 oz
Wushu Cutout 4.3 in 1.26 in 2.5 oz

Installing your grip

  1. Clear the rifle and confirm it’s unloaded. Remove the magazine.
  2. Remove your old grip screw and slide the old grip off slowly: the selector detent spring sits in the grip and the detent can drop out.
  3. Seat the spring in your new grip, line it up with the detent and slide the grip onto the receiver.
  4. Thread in the included grip screw and snug it firmly. Don’t over-tighten.
  5. Function-check the safety selector before you head to the range.

Want the long version with photos? Read our installation guide. Not sure about your lower? Ask us before you order.

Specs and fitment

Every model fits standard mil-spec AR-15 lower receivers and installs with the included grip screw in a few minutes.

AR-10 / LR-308: not compatible. An AR-10 version is coming soon.

Standard grip in OD Green Cerakote, left profile
Material
SLS carbon-fiber-reinforced nylon (PA11-CF)
Finish
Vapor-polished, then Cerakoted and oven-cured
Texture
Stippled side panels, front strap and backstrap
Fits
Mil-spec AR-15 lower receivers
Not compatible
AR-10 / LR-308 (AR-10 version coming soon)
Included
Grip screw
Height
4.0 in Standard models · 4.3 in Wushu models
Max width
1.06 in Standard models · 1.26 in Wushu models
Weight
1.5–2.5 oz depending on model
Tensile strength
Up to 69 MPa (material data sheet, X axis)
Heat deflection
178 °C / 352 °F at 1.8 MPa (material data sheet)
Made in
USA, to order

Four profiles, side by side

Same material, same finish, same fit. Pick the angle and the feel that suit how you shoot.

Four profiles, side by side
Standard grip in Black Cerakote, front three-quarter view on a dark background Standard Standard Cutout grip in Black Cerakote, front three-quarter view on a dark background Standard Cutout Wushu grip in Black Cerakote, front three-quarter view on a dark background Wushu Wushu Cutout grip in Black Cerakote, front three-quarter view on a dark background Wushu Cutout
ProfileClassic rifle angle, solid sidesClassic angle, open side windowsNear-vertical, full hand fillNear-vertical, open side windows
Height (receiver to bottom)4.0 in4.0 in4.3 in4.3 in
Max width1.06 in1.06 in1.26 in1.26 in
Weight2.0 oz1.5 oz2.3 oz2.5 oz
Best forFull-length stocks, precision and general-purpose buildsLightweight builds that keep the classic angleShort length of pull and squared-up stancesCompact builds that want the vertical feel with open sides
Price $79
Build this one: Standard
$89
Build this one: Standard Cutout
$79
Build this one: Wushu
$89
Build this one: Wushu Cutout

Weights are calculated from each model’s volume and material density; final coated weight can vary slightly.

Fitment questions

Will it fit my rifle?

Every model fits standard mil-spec AR-15 lower receivers and installs with the included grip screw. It does not fit AR-10 / LR-308 rifles; an AR-10 version is coming soon. See fitment and compatibility.

How do I install it?

Remove the old grip screw and slide the old grip off slowly (the selector detent spring sits in the grip), seat the spring in your new grip, slide it on and snug the included screw. Full steps are on our fitment page.

Is a grip screw included?

Yes. Every grip ships with a grip screw.

How much does each grip weigh?

Standard 2.0 oz, Standard Cutout 1.5 oz, Wushu 2.3 oz, Wushu Cutout 2.5 oz. Weights are calculated from each model’s volume and material density; finished weight can vary slightly.

Four Tapp Tactical grips side by side: Standard in Black, Standard Cutout in FDE, Wushu in OD Green and Wushu Cutout in Burnt Bronze

Your rifle. Your color. Built to order.

Four profiles, any Cerakote color, made in the USA and shipped in 3–5 business days.

Build your grip