Three Standard grips in Tungsten, Burnt Bronze and Sniper Grey Cerakote, left side profiles

Cerakote on Polymer Grips: Durability, Cure and Color

Cerakote is best known as a firearm finish for metal, but it's just as much at home on a polymer grip when the surface is prepared correctly. Here's what Cerakote is, how we apply it and what it means for durability and color choice.

What Cerakote is

Cerakote is a ceramic-polymer thin-film coating. It's sprayed on and cured into a hard finish that resists abrasion, chemicals and UV fading. Because it's so thin, typically around a thousandth of an inch or less, it doesn't change how a part fits.

Why surface prep matters on nylon

As-sintered nylon has a slightly porous, sandy surface. Coating it directly would trap that texture under the color. We vapor-polish every grip first, which smooths and seals the surface, so the Cerakote goes on evenly over a clean, consistent base. Read vapor polishing explained.

Oven-cured

We use Cerakote H-Series colors, which are heat-cured. Typical H-Series cure temperatures of around 250 °F (121 °C) sit well below the heat deflection temperature of our PA11-CF composite, 178 °C (352 °F) at 1.8 MPa, so the grip holds its shape while the finish cures.

How durable is it?

Over a sealed, vapor-polished surface, oven-cured Cerakote forms a hard, even finish that shrugs off sweat, oils, common gun cleaners and sunlight. Like any finish, sustained abrasion against hard surfaces can wear it over time. See how to clean and care for a Cerakote grip.

Colors

Black (H-146 Graphite Black), FDE (H-265 Flat Dark Earth) and OD Green (H-236 O.D. Green) are included in the price. Choose Other to enter any Cerakote color name or code for +$25. Learn how to choose a custom color or browse the Cerakote colors page.

Made to order in the USA. Ships in 3–5 business days. Custom (“Other”) colors can add up to 10 business days.

30-day return window. Custom-color grips can’t be returned.

Preview your color in the builder

Back to blog

FAQ

How thick is Cerakote?

Thin: typically around a thousandth of an inch or less, so it doesn't change how the grip fits the receiver.

Is Cerakote durable on a nylon grip?

Yes. Applied over a vapor-polished, sealed surface and oven-cured, it forms a hard, even finish that resists scuffs, solvents and UV fading in normal use.

Why are Black, FDE and OD Green included but other colors cost extra?

Black, FDE and OD Green run in regular batches. Other colors are sprayed for your order, which adds +$25 and up to 10 business days.

Build your grip

Four profiles, any Cerakote color, made to order in the USA. Ships in 3–5 business days.

Open the builder

More guides