AR-15 Pistol Grip Fitment: What Fits and What Doesn't
Share
Before you buy any grip, make sure it fits your rifle. The good news is that the AR-15 grip interface is one of the most standardized on the platform.
What fits
Every Tapp Tactical model (Standard, Standard Cutout, Wushu and Wushu Cutout) fits mil-spec AR-15 lower receivers and installs with the included grip screw. Caliber doesn't change that: if the rifle is built on a mil-spec AR-15 lower, the grip interface is the same.
What doesn't fit
Our current grips don't fit AR-10 / LR-308 rifles. An AR-10 version is coming soon.
How an AR-15 grip attaches
- The grip screw passes up through the grip and threads into the receiver.
- The receiver's grip lug is the threaded section at the rear of the lower that the top of the grip slides over.
- The safety selector detent and spring. The spring sits in a channel at the top of the grip and pushes the detent against the selector. That's what gives the selector its positive click.
Things to check on non-standard lowers
- Billet lowers with integrated trigger guards. Most use the standard grip interface, but the trigger guard shape can sit close to the top of the grip. If you're unsure, contact us with your lower's make and model before ordering.
- Aftermarket selectors. Most ambidextrous and short-throw selectors use the standard detent and spring. If yours came with its own detent or spring, use those.
- Grip screw. Every grip ships with a grip screw, so you don't need to reuse the old one.
Installing your grip
Swapping a grip takes about ten minutes and one tool. Follow our step-by-step installation guide, which includes a function check, and see the fitment page for dimensions.
Lead time
Made to order in the USA. Ships in 3–5 business days. Custom (“Other”) colors can add up to 10 business days.
Build your grip or compare profiles in the buying guide.


